How to install peel and stick Wallpaper?

 Here's a step-by-step guide for installing peel and stick wallpaper:

1. Prepare the surface: Clean the wall surface thoroughly, making sure it is free of dust and debris. If the wall has any cracks or holes, fill them with spackling compound and let it dry completely.

2. Measure the wall: Measure the height and width of the wall to determine how much wallpaper you will need. Make sure to account for any windows or doors that will need to be cut around.

3. Cut the wallpaper: Cut the wallpaper to the correct size, making sure to leave a little extra on the top and bottom for trimming.

4. Peel the backing: Peel the backing off of the first strip of wallpaper, being careful not to let it fold or wrinkle.

5. Apply the wallpaper: Start at the top of the wall and align the top edge of the wallpaper with the ceiling. Smooth it down with a wallpaper smoothing tool, starting from the center and working your way out to the edges. Repeat the process with each subsequent strip of wallpaper, making sure to match the pattern if necessary.

6. Trim the edges: Use a sharp blade to trim any excess wallpaper along the edges of the wall and around windows or doors.

7. Enjoy your new look: Once all of the wallpaper has been applied and trimmed, stand back and enjoy your new, updated room!

Remember to take your time and be patient when installing peel and stick wallpaper. A little extra effort during the installation process will pay off in the end with a smooth, professional-looking finish.